RAID Reconstructor 4.30



Publisher Description



Recover data from a broken RAID Level 5 or 0 Array.
Runtime's RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives.
Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in a virtual image, an image file, or on a physical drive.
Once you created an image you can use it for further data recovery processing with Runtime's GetDataBack. If you create the image on another physical drive, you can process it with GetDataBack too or you might even be able to directly boot from it.
RAID Reconstructor is read-only. It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".
Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.
The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.
RAID Reconstructor also runs from the Runtime Live CD or a WinPE boot CD-ROM.


About RAID Reconstructor

RAID Reconstructor is a free trial software published in the Backup & Restore list of programs, part of System Utilities.

This Backup & Restore program is available in English. It was last updated on 05 March, 2024. RAID Reconstructor is compatible with the following operating systems: Linux, Windows.

The company that develops RAID Reconstructor is Runtime Software. The latest version released by its developer is 4.30. This version was rated by 5 users of our site and has an average rating of 3.2.

The download we have available for RAID Reconstructor has a file size of 2.10 MB. Just click the green Download button above to start the downloading process. The program is listed on our website since 2012-09-27 and was downloaded 1,403 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded software with your antivirus. Your antivirus may detect the RAID Reconstructor as malware if the download link is broken.

How to install RAID Reconstructor on your Windows device:

  • Click on the Download button on our website. This will start the download from the website of the developer.
  • Once the RAID Reconstructor is downloaded click on it to start the setup process (assuming you are on a desktop computer).
  • When the installation is finished you should be able to see and run the program.



RELATED PROGRAMS
Our Recommendations






BarCode2D-PNG


Click stars to rate this APP!

Users Rating:  
  3.2/5     5
Downloads: 1,403
Updated At: 2024-03-05
Publisher: Runtime Software
Operating System: Linux, Windows
License Type: Free Trial